What are the POE switch connection methods?
PoE switches in practical applications, or very particular about, and not pull the connection can be used for power supply. If your device does not support PoE how to do, or do you want to use the traditional switch to achieve PoE how to do? Generally speaking, there are 4 kinds of situations.
1, switches and terminals are supported by PoE
To the above, both sides support the most simple, the PoE switch directly through the network cable to support PoE powered wireless AP and network camera. But also need to pay attention to determine whether they are standard PoE equipment, but also to determine the purchase of the cable is standard, the quality should be guaranteed.
2, the switch supports PoE, the terminal does not support PoE
Such a situation can not be directly connected, you need to use PoE separator. PoE switch connected PoE separator connecting device, PoE will be separated into a data signal separator power supply and power, there are two output lines, a power output line, a network data signal output line common cable. Power output has 5V/9/12V, etc., can be matched with a variety of non PoE DC input terminals, supporting IEEE 802.3af/802.3at standard. The output line of the data signal is that the ordinary cable is directly connected to the network port of the non PoE receiving terminal.
3, the switch does not support PoE, terminal support PoE
The PoE does not support the use of the switch to the PoE power supply, the switch out of the PoE power supply and then accept the electrical equipment, PoE power supply will be added to the network after transmission to the terminal. This scheme is helpful to extend the original routing network and has no influence on the original network.
4, the switch does not support PoE, the terminal does not support PoE
Both do not support the case, if you still want to achieve PoE, then switch out to connect the PoE power supply, then the PoE splitter, and finally transferred to the terminal.
Program three and program is suitable for the transformation of the traditional network, that is, the original switch does not support PoE power supply, but also want to use the benefits of PoE power occasion.
In general, no matter what the scene can be used PoE, easy to use the convenience brought about by PoE.
In the choice of PoE switch is very important, a good PoE switch can make the whole system more stable and easy to maintain and upgrade. PoE Hong Runguangxiang‘s excellent performance switch series, from 100m to Gigabit Gigabit to the choice is very much also, flexible networking, convenient use, is a lot of video monitoring project‘s first choice, products are exported to foreign countries.